BTM108B steel pipe blasting testing machine

Equipment use:

      BTM108B explosion testing machine is mainly used for the explosion pressure test of hydraulic large pipe fittings such as steel pipe, natural gas pipe, oil pipe and ocean pipe。Advanced servo control technology is used to control the test pressure.Meet the demand for large flow and high pressure during pressurization;The circumferential deformation was measured within the elastic section during the pressurization process.The circumferential and axial microstrain can be measured during the whole stage from pressure to blasting.The water intake can be measured during the test.The test process is controlled by computer and data acquisition, storage and processing are carried out。


Meet the criteria:

     SYT 5992-2012 Hydrostatic Bursting Test Method for conveying steel pipe, etc


BTM108B steel pipe blasting testing machine color page-2.jpg

                   

Main features:

      1.The equipment is used for the pressure-proof blasting test of steel pipe and pressure vessel. It can complete the pressing, maintaining pressure, raising pressure again, identifying blasting, obtaining test results, saving data and generating reports to complete the whole experiment.

      2.During the test process, the pressure data can be collected in real time, and the pressure-time curve, water-intake-stress curve, flow-time curve, pressure-intake-water curve, etc., can be displayed individually or multiple at the same time.

      3.The circumferential deformation data of elastic section can be collected, and the circumferential deformation time curve and pressure circumferential deformation curve can be drawn.The micro-stress curve in the whole test process can be collected.

      4.The equipment has the function of saving test parameters.The equipment has the function of recording the failure time and nature of the test and the operation of the operator;

      5.The equipment has complete safety functions such as emergency shutdown, failure protection, liquid level alarm, over-temperature alarm, ultra-high pressure alarm, leakage sound and light alarm, motor overload alarm, power failure protection and so on。



Technical parameters:

Project name

Main technical parameters

Equipment type

BTM108B series

Test piece type

Steel pipe, oil pipeline, natural gas pipeline, boiler pipeline, pressure vessel, etc

Test piece size

Length ≤12m, nominal caliber ≤1.2m

enforce standards

SYT 5992-2012, etc

Burst pressure

Adjustable from 10-100MPa

Pressurization mode

Inlet plunger pump

Control mode

Servo motor

Test medium

Dielectric system

Single 150L, double boxes in parallel

Flow size

Adjustable from 1L/min to 16L/min

Monitoring system

Hikvision monitoring system, 8-way network hard disk engineering video recorder, 8-way network switch

Computer control system

Universal special controller and special control software

Extended function

Circumferential deformation test: cable encoder, measuring range 1000mm, resolution 0.01mm

Microzone strain test: Strain instrument, 0.Grade 5, strain gauge 100 pieces

Water intake measurement: load cell is used